The basic tool for producers of interior roller blinds is a station for cutting fabric. The cutting tables for fabrics (SRM) that we propose, are addressed to large and small producers as well as to people who are just starting with production. A wide selection of cutting tables will satisfy various needs.

For small companies and for those who have just launched production, and who seek solid but reasonably priced work stand, we recommend Budget type of tables and the new table in our offer – a table with pneumatic cutting. For companies which value quality and efficiency, we recommend Standard and Premium type of SRM. 3 types of sizes and lots of additional options in all types of table are available.

On special request we can make diffrent size of table and equipt it according to customer’s requirements. An electric disc cutter in a basic kind of tool, and in Premium version, electric disc cutter and ultrasonic knife (used interchangeably). The ultrasonic knife cause smooth and not frayed cutting and that’s why it the best option for difficult fabrics.

SRM Budget

It’s the simplest type of cutting table. Depending on the selected size, it can feature electric cutting knife or manual, off-the-shelf knife. Clamp also depends on that – Medium size features a double pneumatic clamp, and Mini size is provided with a single manual clamp. Regardless of the size and knife, the operating mode is manual (it means that operator moves the knife manually). Since the table equipment is minimised, the price is very attractive and it provides a perfect solution for start- ups that purchase their first fabric cutting station. The main advantage of the table is solid linear guide fitted with a carriage, which carries a disc cutter. This solution provides high precision and a very long service life of the device.

SRM Standard

Higher version of fabric cutting table, featuring as standard an electric disc cutter. Contrary to Mini versions, where the operator operates the cutter manually, larger tables feature automatic cutter operation. In this case the table is operated via a touch panel. The option available in the software include: detection of material run-out, setting of clamp function (lowered or raised clamp at cutter return), setting of cutter speed or simple setting of cutter travel distance. Further to that, the panel displays cut counter and enables language selection upon activations (Polish/English). In order to modify advance table settings the operator must log in.

Basic equipment of the Standard version features LED illumination of the cutting sucker and double pneumatic clamp. With this equipment plus excellent price-quality ratio, it is the most popular table model.

SRM Premium

The highest version of the SRM cutting table in our offer. The table is equipped in two interchangeable knives: electric disc cutter and ultrasonic knife. The touch panel is used for the insertion of standard settings – the operator inserts the length of the produced blind, switches on or off the sensor of the end of a fabric (the knife is moving only to the length of the material, not the table), and it is also possible to change the speed of knife movement – at the beginning and later, normal movement – which is very important when the ultrasonic knife is in use. With this option the operator can choose the best speeds for every, even the toughest fabric, and later, save the setting for 25 types of fabrics. Switching between the knives is very easy and takes no longer than 1 minute.

Premium version features all equipment options of the Standard version. Additionally, the table is equipped in a long ruler paced across the width, the LED backlight on the cutting section, a startup cord under the working table, and manual centering system under the worktop. This configuration makes the device very efficient and it can be further improved by adding additional options.

SRM Pneumatic

New in our offer. For those seeking to buy a large table, reliable and simple to operate.
Cutting with replaceable off-the-shelf blade and pneumatic actuator responsible for blade
travel. For this reason it is necessary to have to a compressed air network. The module is
equipped with a double pneumatic clamp and an optional LED backlighting (requiring
connection to a regular power outlet). Due to the fact that the blade moves rapidly at the end of the table a sophisticated control system is not possible. Just like on other tables, we can install a manually regulated ruler or with a digital display or equip the table with an additional shelf, or a folding shelf “carved” from the table top (facilitating access to fabric on the table top – detailed description can be found in additional options).

Additional options

• Ruler over the entire width of the table enables the fabric to be accurately aligned to the required measure and angle. The ruler can be adjusted and locked manually with distances indicated by measures stuck to the table – in basic version. A higher version features a ruler with magnetic stripe and digital display for measurement read-out. Top version features a ruler controlled with touch panel used for entering the measurements of the fabric being cut and the ruler automatically moves to the pre-set position.
• System for rolling out fabric involves a ruler with grippers. This is an additional simplification for the operator – their task here is only to enter the dimension piece and the ruler will stretch the material to the required width of the table. The operator must unfold the material to the blade, then turn and remove the piece when it is ready.
• Automatic unwinding fabric feeders is an additional convenience when buying a fabric cutting table with a gripping ruler.
• Material Backlighting Backlight on the module is one of the standard options for the SRM roller blind cutting table, but the backlighting surfaces can be additionally increased by the area of the entire work table or only part of it. In this case, we use LED panels under a worktop made of impact resistant milk glass.
• Manual fabric roll centering can be done manually – the SRM table operator can use special wheels underneath the table top to move the roll in the correct direction so that the fabric is perfectly adjacent to the side band. This process can be automated.
• Pneumatic back clamp with assembly tray with dies (holders for blind’s tube) for those seeking to use the most of table capabilities and size. This solution provides an assembly station at the end of the table for folding the blinds (practical solution for systems, where fabric tip must be forced in tube channel).
• Underneath the work table top, at 1⁄3 or 1⁄2 of the length of the work table the operator can place a shelf, which can be used to gather components, fabric or ready roller blinds Additional shelf under the table top.
• In the case of large tables, particularly very wide tables, we recommend a table top with a fold out shelf 60 cm wide. The unfolded shelf is a part of the table top, however when folded it enables easier access to the fabric in the middle of the table. The shelf is held by gas actuators, so that it does not fall during operation and does not hit the table top when it is closed.
• Worktop elongation to 4 m.

The small saw blade is slightly pulled out from the bottom, by means of a pneumatic actuator, ino  order to cut the element. The work area of the saw blade is secured by housing and actuators that hold down the fabric to be cut. The work area where the fabric is cut has been limited to 5cm x 25cm (H x W). The saw is equipped with roller feeders (or table tops with a special antistatic liner) 3m and 2.7m long. The shorter feeder features a programmable bumper, moving from the saw at a distance of 2.5m with a servo motor. The saw blade features a pneumatic clamp. The saw is equipped with Zebra label printer, keypad output and Delta touch panel. The program is designed to make the use of the saw as simple as possible. Production order data is transferred from the computer (technical requirements: Windows OS and MS Excel) to the saw driver and then to the panel. An exit from automatic and manual saw operation is also provided.

Apart from the saws on our offer, we can also offer a cutting station with an off-the-shelf saw. This workstation features two 2m and 2.5m long feeding tables. Under the table tops shelves have been provided for storing finished products or components needed for production. On longer table tops, a sliding bumper is mounted, which is programmable from the touch panel level. The saw itself is levelled so that the cut fabric is at the table top level and adjusted to be on the perforated plate under which a chute for chips and cuttings is provided. An arm with pneumatic connection and a gun to clean the workplace is mounted above the saw. The customer may choose whether the work tables are to be supplied with rollers or table tops covered with antistatic lining. Additionally, it is possible to opt out from the bumper driven by a servo motor and the touch panel, and in stead use a manual adjustment of the gauge. With the manual option, the distance can be read out with a measuring tape on the table or by means of a digital display and magnetic strip.

A gauge is a mobile device that can be installed on many different workstations. It is used forme asuring the distance of the cut material. The gauge is available in 3 versions: manually moved, locked, with distance reading from the measuring tape; manually moved and locked, distance displayed on a digital display (measurement is carried out by means of magnetic strip with sensor); bumper with servo-motor drive, programmable from the touch panel. Depending on the needs of each manufacturer, it is possible to precisely measure the fabric to be cut.

The TR-A is lift for inspecting lightweight fabric rollers for interiors. As with the rest of the
lift versions, no standard sizes are offered – everything is tailor made to customer’s needs.
The same applies to the equipment options. The lift can be operated by foot with two
footswitches up / down in the simplest version or by means of buttons. We can improve this
process by using a control cabinet with a touch panel, from which the roller bind height can
be controlled. Depending on the accuracy a roller blind manufacturer wants to achieve, we
offer two types of drives – cheaper with a accuracy up to 1mm or more expensive, which is
able to provide an accuracy of up to 0.1mm.
In addition to the design and drive, the tester is also equipped with universal handles for roller
blinds in cassettes and free hanging roller blinds wound only on a tube. The operator can
check the width of the roller blind by means of glued on measuring gauges or in a higher
version, this value can be displayed on the digital display attached to the sliding handle. In
the most advanced version, the handles automatically extend to the desired width.

On request TR-S: steel version.

TR-AD

The tester is used to check various types of roof roller blinds. We design and print (3D in FFF technology) for as many systems used by the client as possible, in order to obtain the most versatile solution possible.
The frame angle can be adjusted manually or by motor depending on the selected version.

The dimensions of the roller blinds can also be entered by means of the touch panel or set manually into the measuring tape or by means of a digital display. The tester is made of aluminium frames. The construction is mobile, at the same time enabling moving the device and checking the electric roller blinds. When the tilt angle is set automatically, the TR-A D is equipped with a three-phase motor with a gearbox that works with the inverter and encoder, which allows the lift to adjust the tilt angle from 90 to 30 degrees with an accuracy of approximately 1 degree.

TR-AD Economic version

The tilt angle of the frame is controlled manually by means of the wheel, angular scale and
gearbox. The width adjustment bar of the roller blind is manually moved and locked
pneumatically – the dimensions are displayed on electronic displays. The height is set using
sliding handles running on hardened rails. As with the width setting, dimensions are displayed on the digital indicator. The economical version has no backlight.

TR-AD Basic version

Touch panel control. Height and width adjustment is carried out manually by means of a sliding beam and trolleys. Lighting from above and rear.

TR-A D Basic version with gauge for measuring the width

Touch panel control. Height adjustment is carried out manually by means of trolleys with handles. Manual width adjustment with position indicator with magnetic strip, allowing precise adjustment of the desired width with an accuracy up to 0.5 mm illuminated from the top and rear.

TR-A D advanced version with automatic width adjustment

Width adjustment via servo motor with gearbox for precise adjustment of the width from the touch panel. Slide the working beam after the ball screw. Height adjustment is carried out manually by means of trolleys with handles. Lighting from above and rear.

TR-A D advanced version with automatic width and height adjustment

Width adjustment via servo motor with gearbox for precise adjustment of the width from the
touch panel. Slide the working beam after the ball screw. Height adjustment is also carried
out by means of a servo motor with two gearboxes; the height of the roller blind can be set
from the touch panel.
Lighting from above and rear.