for Mosquito Nets Screen – Rol-Pas – production lines, machines and workstands

PA ø300

admin — Sun, 15 Oct 2017 20:13:27 +0000

The small saw blade is slightly pulled out from the bottom, by means of a pneumatic actuator, ino order to cut the element. The work area of the saw blade is secured by housing and actuators that hold down the fabric to be cut. The work area where the fabric is cut has been limited to 5cm x 25cm (H x W). The saw is equipped with roller feeders (or table tops with a special antistatic liner) 3m and 2.7m long. The shorter feeder features a programmable bumper, moving from the saw at a distance of 2.5m with a servo motor. The saw blade features a pneumatic clamp. The saw is equipped with Zebra label printer, keypad output and Delta touch panel. The program is designed to make the use of the saw as simple as possible. Production order data is transferred from the computer (technical requirements: Windows OS and MS Excel) to the saw driver and then to the panel. An exit from automatic and manual saw operation is also provided.

PA ø350 Mosquito nets

admin — Sun, 15 Oct 2017 20:12:55 +0000

The aluminium saws / stations for cutting:
PA ø600 – Saw for exterior roller blinds / PA ø300
PA ø350 Mosquito nets
Cutting station
Gauge

Semi-automatic corner saw (Ø 350) is used for cutting profiles used in the production of mosquito nets. The cut off profile strengthens the corner of the mosquito nets frame and enables its connection. A special holder holds the cut profile in place and then takes the cut piece away.

Cutting station

admin — Sun, 15 Oct 2017 20:11:42 +0000

The aluminium saws / stations for cutting:
PA ø600 – Saw for exterior roller blinds
PA ø300 / PA ø350 Mosquito nets
Cutting station
Gauge

Apart from the saws on our offer, we can also offer a cutting station with an off-the-shelf saw. This workstation features two 2m and 2.5m long feeding tables. Under the table tops shelves have been provided for storing finished products or components needed for production. On longer table tops, a sliding bumper is mounted, which is programmable from the touch panel level. The saw itself is levelled so that the cut fabric is at the table top level and adjusted to be on the perforated plate under which a chute for chips and cuttings is provided. An arm with pneumatic connection and a gun to clean the workplace is mounted above the saw. The customer may choose whether the work tables are to be supplied with rollers or table tops covered with antistatic lining. Additionally, it is possible to opt out from the bumper driven by a servo motor and the touch panel, and in stead use a manual adjustment of the gauge. With the manual option, the distance can be read out with a measuring tape on the table or by means of a digital display and magnetic strip.

Gauge

admin — Sun, 15 Oct 2017 20:10:31 +0000

A gauge is a mobile device that can be installed on many different workstations. It is used forme asuring the distance of the cut material. The gauge is available in 3 versions: manually moved, locked, with distance reading from the measuring tape; manually moved and locked, distance displayed on a digital display (measurement is carried out by means of magnetic strip with sensor); bumper with servo-motor drive, programmable from the touch panel. Depending on the needs of each manufacturer, it is possible to precisely measure the fabric to be cut.

Crimping machine for mosquito nets frame

admin — Sun, 15 Oct 2017 19:30:59 +0000

A press for crimping mosquito net frames (manual and pneumatic) allows for a strong connection of the mosquito nets frame. It will connect both window and door profiles. In the pneumatic version our offer includes a crimping machine equipped with two actuators with knives attached. The clamping of the linked frame can be solved by manual clamping adjusted by the operator or by using two joystick controlled actuators. The pneumatic crimping machine is a guaranteed stable connection of the mosquito nets frames resulting in zero complaints made by customers. This is the result of using large main actuators responsible for knife movement and compressing the corner inside the aluminium profiles.

Georgian bar milling machine

admin — Sun, 15 Oct 2017 19:30:01 +0000

The milling machine cuts the cross sectional aluminium profiles (Anwis profile) needed in the production of mosquito nets. It allows the operator to fine tune the depth and height of the cut. It is suitable for profiles with different widths. The Milling machine for mosquito nets is ergonomic and very comfortable to use; it facilitates and accelerates the creation of mosquito nets.

Table for mosquito nets

admin — Sat, 07 Oct 2017 15:37:10 +0000

This is a simple workstation without which no mosquito nets manufacturer can do without. The table (steel construction, welded and powder-coated) has a sloping table top with higher barriers, which makes it easier to stretch the mosquito nets. The table top is covered with an extremely durable antistatic lining. This surface makes it very easy to clean the table of swarf or other unwanted material that can scratch the frame of the mosquito nets. The table is fitted with a feeder for the coiled net. We can also optionally add a shelf underneath the top for storing tools or materials. We will be happy to listen to and fulfil all and any wishes that our customers may.

Rolling mill for mosquito nets

admin — Wed, 27 Sep 2017 17:19:45 +0000

If the offer of the company includes mosquito nets, every now and then a customer will also appear who would like to put a mosquito net on an unusual window. With the mosquito net profile rolling mill, it is possible to produce semi-circular mosquito nets and even round nets (if the diameter of the circle is greater than 55 cm). The rolling mill is equipped with exchangeable guide rollers (standard or made on request), which makes changing the profile or the system being used is not a problem. The rolling mill is an electrical device and effortless to use.